- Ensure Flashtool installed correctly with the drivers required.
- Make sure the firmware was downloaded correctly according to the device that wants to be Flash-ing.
- Copy the firmware that was downloaded to C: \ Flashtool \ firmwares
- Open Flashtool (adjust the operating system ente, if 32bit, then run Flashtool, if 64bit, run Flashtool64, is located at C: \ Flashtool or in Startmenu)
- Click on the picture of lightning, then a small dialog box appears, select Flashmode, then click OK
- Then the dialog box will appear again to choose the firmware that will be Flash-ing, and then select Device which according to the device ente 'Neo L', then Versionnya eg '4 .1. B.0.587 ', and its branding.
- For the right part and do not need to be changed. Simply click OK.
- Flashtool will prepare the files, then you will see the animation box that displays info that the device must be connected to the PC.
- For neo L, turn off the device, then hold down the Back button and plug into the PC using the data cable to the neo-L LED is green, it will automatically do the flashing of the device Flashtool ente.
- Wait until it is completely finished 100% and may be revoked if there is no activity from Flashtool.
- Unplug the device ente, close the application Flashtool, then turn on the device ente.
- Voila!
Source:
HOW TO INSTALL FIRMWERE SONY XPERIA NEO L MT25i